3m SC/SC DUPLEX 9/125 SINGLEMODE FIBER PATCH CABLE

3m SC/SC DUPLEX 9/125 SINGLEMODE FIBER PATCH CABLE

For your high speed singlemode fiber applications Features: Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. A cost effective solution that provides higher bandwidth and support for longer distances Perfect for use in Gigabit Ethernet applications Headroom for tomorrow’s higher bandwidth needs Lifetime warranty against defects of materials and workmanship Connectors: (2) SC to (2) SC Buffer material: PVC Buffer OD: 900 µm Jacket material: PVC (OFNR-rated) Jacket OD: 3.0 mm Jacket color: Yellow Attenuation @1310 nm: 1.0 dB/km Attenuation @1550 nm: 0.75 dB/km Maximum tensile load: 100 N/cm Loaded min. bend radius: 5 cm Unloaded min. bend radius: 3 cm Crush resistance: 750 N/cm Impact resistance: 1000 cycles Flex resistance: 5000 cycles Specifications: Color: Yellow Size: 3m Weight: 0.25lbs

Buy Network Cables at www.worldofcables.com

RIT SHIELDED 100BASE-TX BALUN

RIT SHIELDED 100BASE-TX BALUN

Converts the Token Ring data connector (Type 1) to Cat5 UTP cabling; Shielded Features: In the past, if you wanted to run Ethernet from your workstations and hubs, you had to consider the expense of converting your entire building's Type 1 cable plant to UTP cabling. Now you can leave your cable plant in place and simply use these baluns to convert from the Token Ring data connector at the wall plate to RJ45 UTP cabling. Simply plug the balun's data connector end into the Type 1 wall plate jack and plug in your 100 Base-TX Ethernet device (NIC, hub, etc.) into the RJ45 end of the balun with a standard Category 5 patch cable. The balun matches impedances of a 100 Ohm RJ45 terminated cable and a 150 Ohm STP cable (cable plant), and achieves frequencies up to 100Mhz. Allows for connection of a 100Base-TX hub or adapter card with RJ-45 ports to an existing IBM cabling System Matches impedances of a 100 Ohm RJ-45 terminated cable and a 150 Ohm STP cable for frequencies of up to 100Mhz High Performance: 0.5dB insertion loss from 0.1 to 100Mhz, less than -32dB crosstalk at 100Mhz Specifications: Color: Black Size: 39.9mm Weight: 0.5lbs

Buy Network Cable at www.worldofcables.com

7ft 110/CAT 5E 568B RJ45 PATCH CORD GREY

7ft 110/CAT 5E 568B RJ45 PATCH CORD GREY

Used between 110 blocks and hubs Features: With fast Ethernet data transmissions and telco voice applications quickly merging over the same cabling network, it's better to be installing the best patch cabling possible. This is offering its RJ45 to 110 block style patch cables in 350Mhz rated Enhanced CAT5 cabling. Constructed of 4 pair stranded UTP cabling these cables simplify 110 block to hub connections with convenient color coded identification. Applications for the 110 block to RJ45 patch cable include multiple-user workstation runs from a single 110 block in the wiring closet after terminating one side of the 110 block with a patch panel connection using trunk cables and patch panels. Conductor: 24 AWG Stranded Copper Jacket: PVC Applications: 10 BASE-T; 4/16 Mbps Token Ring 100 BASE VG AnyLAN; 100 Mbps TP-PMD 100 BASE-T; 1000 BASE-T Designed For: 110 block to hub connections Certifications: TIA/EIA 568-B; UL Listed Specifications: Color: Grey Size: 7ft Weight: 0.32lbs

Buy Network Cables at www.worldofcables.com

14ft 110/CAT 5E 568B RJ45 PATCH CORD GREY

14ft 110/CAT 5E 568B RJ45 PATCH CORD GREY

Used between 110 blocks and hubs Features: With fast Ethernet data transmissions and telco voice applications quickly merging over the same cabling network, it's better to be installing the best patch cabling possible. This is offering its RJ45 to 110 block style patch cables in 350Mhz rated Enhanced CAT5 cabling. Constructed of 4 pair stranded UTP cabling these cables simplify 110 block to hub connections with convenient color coded identification. Applications for the 110 block to RJ45 patch cable include multiple-user workstation runs from a single 110 block in the wiring closet after terminating one side of the 110 block with a patch panel connection using trunk cables and patch panels. Conductor: 24 AWG Stranded Copper Jacket: PVC Applications: 10 BASE-T; 4/16 Mbps Token Ring 100 BASE VG AnyLAN; 100 Mbps TP-PMD 100 BASE-T; 1000 BASE-T Designed For: 110 block to hub connections Certifications: TIA/EIA 568-B; UL Listed Specifications: Color: Grey Size: 14ft Weight: 0.32lbs

Buy Network Cables at www.worldofcables.com

3ft 110/CAT 5E 568B RJ45 PATCH CORD GREY

3ft 110/CAT 5E 568B RJ45 PATCH CORD GREY

Used between 110 blocks and hubs Features: With fast Ethernet data transmissions and telco voice applications quickly merging over the same cabling network, it's better to be installing the best patch cabling possible. This is offering its RJ45 to 110 block style patch cables in 350Mhz rated Enhanced CAT5 cabling. Constructed of 4 pair stranded UTP cabling these cables simplify 110 block to hub connections with convenient color coded identification. Applications for the 110 block to RJ45 patch cable include multiple-user workstation runs from a single 110 block in the wiring closet after terminating one side of the 110 block with a patch panel connection using trunk cables and patch panels. Conductor: 24 AWG Stranded Copper Jacket: PVC Applications: 10 BASE-T; 4/16 Mbps Token Ring 100 BASE VG AnyLAN; 100 Mbps TP-PMD 100 BASE-T; 1000 BASE-T Designed For: 110 block to hub connections Certifications: TIA/EIA 568-B; UL Listed Specifications: Color: Grey Size: 3ft Weight: 0.32lbs

Buy Network Cables at www.worldofcables.com

3m 10Gb SC/SC DUPLEX 50/125 MULTIMODE FIBER PATCH CABLE

3m 10Gb SC/SC DUPLEX 50/125 MULTIMODE FIBER PATCH CABLE

Laser-optimized 50 micron 'Aqua fiber' for LED/VCSEL laser light sources and 10-Gigabit applications. Get blazing-fast 10-Gigabit performance with laser-optimized 50/125 multimode fiber patch cords. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications. Features: Fully compatible with 50/125 multimode fiber applications Use with both LED and VCSEL laser light sources Designed for use in 10-Gigabit ethernet applications Lifetime warranty against defects of materials and workmanship Specifications: Connectors: (2) SC to (2) SC Type: Laser-Optimized 50/125 Multimode Duplex Optical Multimode 3 (OM3) fiber supporting 2000MHz.km EMB at 850nm 10 Gigabit transfers up to 300m using 850nm VCSEL source Jacket material: PVC (OFNR-rated) Jacket color: Aqua Weight: 0.3lbs

Buy Network Cables at www.worldofcables.com

5m 10Gb SC/SC DUPLEX 50/125 MULTIMODE FIBER PATCH CABLE

5m 10Gb SC/SC DUPLEX 50/125 MULTIMODE FIBER PATCH CABLE

Laser-optimized 50 micron 'Aqua fiber' for LED/VCSEL laser light sources and 10-Gigabit applications. Get blazing-fast 10-Gigabit performance with laser-optimized 50/125 multimode fiber patch cords. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications. Features: Fully compatible with 50/125 multimode fiber applications Use with both LED and VCSEL laser light sources Designed for use in 10-Gigabit ethernet applications Lifetime warranty against defects of materials and workmanship Specifications: Connectors: (2) SC to (2) SC Type: Laser-Optimized 50/125 Multimode Duplex Optical Multimode 3 (OM3) fiber supporting 2000MHz.km EMB at 850nm 10 Gigabit transfers up to 300m using 850nm VCSEL source Jacket material: PVC (OFNR-rated) Jacket color: Aqua Weight: 0.3lbs

Buy Network Cables at www.worldofcables.com

3ft 110/CAT 5E 568B RJ45 PATCH CORD GREY

3ft 110/CAT 5E 568B RJ45 PATCH CORD GREY

Used between 110 blocks and hubs Features: With fast Ethernet data transmissions and telco voice applications quickly merging over the same cabling network, it's better to be installing the best patch cabling possible. This is offering its RJ45 to 110 block style patch cables in 350Mhz rated Enhanced CAT5 cabling. Constructed of 4 pair stranded UTP cabling these cables simplify 110 block to hub connections with convenient color coded identification. Applications for the 110 block to RJ45 patch cable include multiple-user workstation runs from a single 110 block in the wiring closet after terminating one side of the 110 block with a patch panel connection using trunk cables and patch panels. Conductor: 24 AWG Stranded Copper Jacket: PVC Applications: 10 BASE-T; 4/16 Mbps Token Ring 100 BASE VG AnyLAN; 100 Mbps TP-PMD 100 BASE-T; 1000 BASE-T Designed For: 110 block to hub connections Certifications: TIA/EIA 568-B; UL Listed Specifications: Color: Grey Size: 3ft Weight: 0.32lbs

Buy Network Cables at www.worldofcables.com